Interlogix TruVision NVR 10 User Manual page 124

Chapter 18: Using the web browser
Menu Function
Email
FTP
SNMP
UPnP
More Settings
Net Statistics
Recording Recording Schedule Define the recording schedules. See "Recording schedule"
Manual Recording
Alarm & Event Alarm Input
Setup
Alarm Output
Manual Trigger
Buzzer Settings
Notifications
Video Loss
Alarm Host Setup
Device Time & Date Setting Define time and date. See "Time and date" on page 92 for
Management
General Settings
Configuration Files
Upgrade Firmware
Holiday
124
Description
Define the settings to send an e-mail. See "E-mail settings"
on page 77 for more information.
Define the FTP settings. See "Configure an FTP server to
store snapshots" on page 78 for more information.
Define the SNMP settings. See "SNMP settings" on page 78
for more information.
Enable this function so that the recorder can automatically
configure its own port forwarding. See "UPnP settings" on
page 79 for more information.
Define a multicast IP as well as the server, HTTP, and RTSP
ports. See page 72.
Check the bandwidth being used by remote live view and
playback. See "Network statistics" on page 81 for more
information.
on page 82 for more information.
Define which cameras can manually record. See "Manual
recording" on page 85 for more information.
Define the alarm input parameters for when an external
alarm is triggered. See "Set up alarm inputs" on page 86 for
more information.
Define the response when an external alarm is triggered.
See "Manual trigger" on page 88 for more information.
Define the manually trigger outputs of the recorder. See
"Manual trigger" on page 88 for further information.
Define the warning buzzer time. See "Buzzer settings" on
page 89 for more information.
Define the notification parameters when irregular events
occur, such as a HDD is full. See "Alarm notification types"
on page 89 for more information.
Define the video loss detection settings. See "Detect video
loss" on page 90 for more information.
Define the remote alarm host. See "Alarm host setup" on
page 91 for more information.
more information.
Define the general settings of the recorder such as
language, device name, enable the wizard, menu timeout,
and enable front panel lock. See "General recorder settings"
on page 94 for more information.
Import/export configuration settings, restore default factory
settings, and restart the recorder. See "Configuration files"
on page 95 for more information.
Upgrade the recorder firmware. See "Upgrade system
firmware" on page 96 for more information.
Define how recordings occur during holiday periods. See
TruVision NVR 10 User Manual