Removing The Right Door; Circuit Braker; Removing The Rear Cover; Removing The Circuit Breaker - Canon iR3570 Service Manual

1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
When tightening the 2 screws used to fix the hinge in place, be sure to close
the right door first.

10.5.16.3 Removing the Right Door

iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / / iR3530 /
1) Open the right door.
2) Remove the reuse band [1], and disconnect the connector [2].
3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
F-10-242
F-10-243
F-10-244
When tightening the 2 screws used to fix the hinge in place, be sure to close
the right door first.

10.5.17 Circuit Braker

10.5.17.1 Removing the Rear Cover

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
0007-7050
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the 13 screws [1] and then the other screw [2]; then, detach the
rear cover [3].
If the left cover (lower) has already been detached, the screw [3] should also
have been removed.
[1]
[1]
[1]
[1]
[1]
[1]

10.5.17.2 Removing the Circuit Breaker

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the 2 screws [1].
F-10-245
[1]
[3] [1]
[2]
F-10-246
Chapter 10
0007-6388
[1]
[1]
[1]
[1]
[1]
0007-6389
10-47