Chapter 7
1) Remove the screw [1].
2) Shift the locking lever [1] to the left to release the developing assembly.
3) Slide the developing assembly [1] slightly to the front; then, disconnect
the connector [2].
4) Remove the developing assembly [1].
7-14
F-7-34
F-7-35
F-7-36
F-7-37
Be sure to hold the developing assembly as shown.
When fitting the developing assembly, be sure to fit the lower right segment
[2] of the developing assembly [1] in the rail [3] of the machine. Thereafter,
slide the developing assembly so that [A] of the developing assembly match-
es [B] of the rail.
7.12.1.6 Removing the Upper Tray
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the 2 screws [1], and detach the upper tray [2].
Reference:
Lift the front of the upper tray [1], and detach it as if to slide it toward the
front.
F-7-38
F-7-39
F-7-40
0007-8345