Copier; Option (Machine Settings Mode) - Canon iR3570 Service Manual
Canon ir4570; ir3570; ir2870; ir2270 laser multifunction printer/copier
Hide thumbs
Also See for iR3570:
- Brochure & specs (23 pages) ,
- Service manual (1008 pages) ,
- User manual (84 pages)
Table of Contents
Advertisement
16.6 OPTION (Machine Settings Mode)
16.6.1 COPIER
16.6.1.1 Copier List
iR2270 / iR2870 / iR3570 / iR4570 / / / / iR4570N / iR2230 / / / iR3530 /
<BODY>
MODEL-SZ Switching regular resized display and ADF document size detection
Sub-item
CL-CHK
Checking DF clutch operation
<Operating procedure>
1) Press CL-CHK to reverse its display.
2) Enter a part corresponding number from the ten-key pad.
3) Press the OK key.
4) Press CL-ON to check DF clutch operation.
CL-ON
Starting clutch operation
Press CL-ON. Then press the OK key to start clutch operation. Press
the OK key again to stop the operation.
(The operation stops automatically in two seconds but the status
changes to STOP only when the OK key is pressed again.)
SL-CHK
Checking ADF solenoid operation
<Operating procedure>
1) Press SL-CHK to reverse its display.
2) Enter a part corresponding number from the ten-key pad.
3) Press the OK key.
4) Press SL-ON to check ADF solenoid operation.
Part corresponding number
0: Pressurizing solenoid
1: Stamping solenoid
[Value at shipping: Factory adjustment value / Value after RAM
clearance: 0]
SL-ON
Starting solenoid operation
<Operating procedure>
Operation specifications shall differ depending on the model.
1) Press SL to reverse its display. Then press the OK key to start
solenoid operation.
2) Press the OK key again to stop the operation.
(The operation stops automatically in five seconds but the status
changes to STOP only when the OK key is pressed again.)
MTR-ON
Starting motor operation
<Operating procedure>
Operation specifications shall differ depending on the model.
1) Press MTR-ON to reverse its display. Then press the OK key to
start motor operation.
2) Press the OK key again to stop the operation.
(The operation stops automatically in five seconds but the status
changes to STOP only when the OK key is pressed again.)
ROLL-CLN Cleaning the ADF roller
While the roller is being rotated automatically by a motor, press
alcohol-moistened lens cleaning paper against the roller for
cleaning.
<Operating procedure>
1) Press ROLL-CLN to reverse its display.
2) While the roller is rotating, press alcohol-moistened lens cleaning
paper against the roller for cleaning.
3) Press ROLL-CLN to reverse its display. Press the OK key to stop
the roller.
FEED-ON
Checking ADF paper feed operation
<Operating procedure>
1) Press FEED-ON and then the OK key to start paper feed in the
operation mode set by FEED-CHK.
Sub-item
<Setting range>
0: AB (6R5E) [Default]
1: INCH (5R4E)
2: A (3R3E)
3: AB/INCH (6R5E)
FEEDER >FUNCTION
Description
T-16-51
COPIER > OPTION > BODY
Description
Level
1
1
1
1
1
1
1
Level
1
Chapter 16
0007-9547
16-31
- Quick Links:
- Service Manual
- E261-0000 Error Code
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
