Checking The Parts; Turning Off The Host Machine; Mounting The Cassette Heater Unit - Canon iR3570 Service Manual

Chapter 2

2.9.2 Checking the Parts

iR3025 / / iR3025N / iR3030 / / iR3030N / iR3035 / / iR3035N / iR3045 / / iR3045N
Prepare the following parts because each part of the Heater PCB is assigned as service part.

2.9.3 Turning Off the Host Machine

iR3025 / / iR3025N / iR3030 / / iR3030N / iR3035 / / iR3035N / iR3045 / / iR3045N

2.9.4 Mounting the Cassette Heater Unit

iR3025 / / iR3025N / iR3030 / / iR3030N / iR3035 / / iR3035N / iR3045 / / iR3045N
1. Mounting to the cassette of the host machine
1) Pull out the cassette 1 and 2.
2) While removing the hook by inserting the part indicated as [1] from the front side of the host machine with a flat blade screwdriver, detach the connector cover [2].
2-30
[1]
F-2-112
T-2-12
No. Name
[1] Heater Unit
[2] Plastic film
[3] Screw (binding; M4X6)
[1]
F-2-113
T-2-13
No. Name
[1] Heater PCB
[2] Screw (TP; M3X6)
How to Turn Off the Main Power
When turning off the main power, be sure to go through the following steps
to protect the hard disk:
1) Hold down the control panel power switch for 3 sec or more.
2) Follow the instructions on the shutdown sequence screen to let the main
power switch be ready to turn off.
3) Turn off the power switch.
4) Disconnect the power cables (for the power outlet).
To operate the Cassette Heater Unit, the Heater PCB needs to be mounted.
[2]
[3]
Part No. Qty.
FK2-0376-000 1pc
FC5-6899-000 1pc
XB1-2400-607 1pc
[2]
Part No. Qty.
FM2-2239-000 1 pc
XB6-7300-607 1 pc
0015-2853
0015-2234
0015-2373