3) When the display of the number of copy is enclosed with red lines on the screen, "Voice Operation Kit" becomes enabled.
If 'Voice Operation Kit' does not work, check the following points.
- Is the slide switch on the voice operation board switched to 66MHz?
- TTS-JA/TTS-EN and ASR-JA/ASR-EN should be installed properly in the Service mode: COPIER > Display >
VERSION.
<When Stopping the Usage>
1) Press the reset key or the voice recognition button three seconds or longer.
Voice Navigation Selection
Select the voice navigation type.
Voice Guide +
Voice Guide
Recognition
You can perform operations using voice commands,
or listen to the voice guide and perform operations
using keys.
Cancel
2
F-2-227
Voice
Recognition
OK
System Monitor
Chapter 2
2-71