Chapter 2
14) Mount the front cover unit [3] with the two screws [2] and mount the
covering rubber [1], which is provided with the product.
Reference
Mounting the Front Cover
1) Fit the 2 claws [2] of the front cover unit [1] into the claw holes [3] of the
machine.
2) While matching the top [4] of the front cover unit against the machine, fit
the lower left claw [2] of the front cover unit [1] in the claw hole [3] of
the machine.
2-10
F-2-36
F-2-37
F-2-38
3) While matching the 2 claws [2] of the front cover unit [1], slide the front
cover unit [1] to the right.
15) Close the front cover [1].
2.2.4 Securing the Copier Main Unit
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / iR3530 / / / / /
- With a pedestal installed
1) Move the copier to the location where it will be installed, and then secure
it with the 4 adjuster wheels of the pedestal.
- Without a pedestal installed
1) Remove the cassettes 1 and 2 and tighten the adjusting screws [1] at the
base plate temporarily until the screw legs touch the bottom slightly.
F-2-39
F-2-40
F-2-41
0006-6767