Laser light can prove to be hazardous to the human body. The machine's laser unit is fully enclosed in a protective housing and external covers so that its light will

not escape outside as long as the machine is used normally.

1.2.5.2 CDRH Regulations

iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / iR3530 /

The Center for Devices and Radiological Health of the US Food and Drum Administration put into force regulations concerning laser products on August 2, 1976.

These regulations apply to laser products manufactured on and after August 1, 1976, and the sale of laser products not certified under the regulations is banned

within the Untied States. The label shown here indicates compliance with the CDRH regulations, and its attachment is required on all laser products that are sold

in the United States.

A different description may be used for a different product.

1.2.5.3 Handling the Laser Unit

iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / iR3530 /

If you must service the area around the machine's laser unit, be sure to take full care to avoid exposure to laser light: do not insert a tool (e.g., screwdriver or those

with a high reflectance) into the laser path; also, remove watches, rings, and the like before starting the work, as they reflect laser light.

The machine's laser light is red in color, and an appropriate label ([1], [2]) is attached to all covers that can reflect laser light. Keep also in mind that the machine's

laser unit cannot be adjusted in the field.

F-1-35

Chapter 1

0007-3174

0007-3175

0007-3176

1-35

Table of Contents