Removing The Left Rear Cover; Removing The Right Rear Cover; Removing The Dust Cover - Canon BJ-W7000 Service Manual

ns CHAPTER 3 MECHANICAL SYSTEM mm
3) Remove the three mounting screws @ and
disconnect the relay connector @ at the side of
the PCB. Then remove the rear cover ©).
Figure 3-104
2. Removing the Left Rear Cover
1) Remove the rear cover .
2) Remove 3 mounting screws @) and remove left
rear cover @).
Figure 3-105
COPYRIGHT © 1998 CANON INC.
3. Removing the Right Rear Cover
1) Remove the rear cover.
2) Remove 3 mounting screws @ and remove
right rear cover @).
Figure 3-106
4. Removing the Dust Cover
1) Remove the left, right, rear, left rear and right
Tear covers.
2) Remove the three mounting screws @ and
remove the dust cover unit @.
Figure 3-107