Output Accessories System Configuration 2; Delivery Accessory System Configuration 3 - Canon iR3570 Service Manual

Chapter 1
[4]Accessories Power Supply-P2 (needed when
installing [1]; standard with 120/230V model)
[5]Inner Puncher Kit-Q1/R1/S1/T1
[6]Finisher Additional Tray-B1
The following shows the functions that the system will provide and the accessories that will be needed:
Function provided
- 2-way delivery
- stapling
Function provided
- 3-way delivery
- stapling
Function provided
- punching

1.1.6 Output Accessories System Configuration 2

iR2230 / / / iR3530
The configuration is as shown in the following figure:
[1]Inner 2-Way Tray-D1
[2]3Way Unit-A1
(powered by host; no need for Accessories
Power Supply-P2)
[3]Output Tray-J1

1.1.7 Delivery Accessory System Configuration 3

iR2270 / iR2870 / iR3570 / iR4570 / / / /
The following shows a typical system configuration of this type:
1-4
[4a]Installation Procedure
- Installation of the Accessories Power Supply-P2
[5a]Installation Procedure
- Installation of the Inner Puncher Kit-Q1/R1/S1/T1
[6a]Installation Procedure
- Installation of the Finisher Additional Tray-B1
T-1-10
Accessory needed
Finisher-S1
Accessories Power Supply-P2
3 Way Unit-A1
Copy Tray-J1
T-1-11
Accessory needed
Finisher-S1
Accessories Power Supply-P2
3 Way Unit-A1
Finisher Additional Tray-B1
Copy Tray-J1
T-1-12
Accessory needed
Finisher-S1
Accessories Power Supply-P2
3 Way Unit-A1
Inner Puncher Kit-Q1/R1/S1/T1
[3]
[3a]
[1a]
[1]
F-1-4
T-1-13
[1a]Installation Procedure
- installation of the Inner 2-Way Tray-D1
[2a]Installation Procedure
- installation of the 3Way Unit-A1
[3a]Installation Procedure
- installation of the Output Tray-J1
[2]
[2a]
0008-6922
0006-6234