Mounting The Heater Pcb - Canon iR3570 Service Manual

5) Attach the connector cover [1].
6) Attach the plastic film [2] (for protecting the AC cable) over the cable [3] to fit the end of the connector cover [A] and the end of the rear side of the host machine
[B].
7) Put back the cassette 3 and 4.

2.9.5 Mounting the Heater PCB

iR3025 / / iR3025N / iR3030 / / iR3030N / iR3035 / / iR3035N / iR3045 / / iR3045N
1) Disconnect the lattice connector [1] of the cassette pedestal.
2) Detach the small cover [2] of the lower rear cover [1] (the detached small cover is not used).
- 1 screw [3]
3) Detach the rear cover [1].
- 14 screws [4]
F-2-120
F-2-121
F-2-122
Chapter 2
0015-2865
2-33