F-9-93
3) Turn the locking plate [1] in the direction of the arrow to release it.
9.5.4.7 Removing the Fixing Film Unit
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) While pushing down the release lever (front) [1], pull out the heater
contact [2].
2) While pushing down the release lever (rear) [1], pull out the heater contact
[2].
3) Remove the screw [1], and free the AC harness [2].
F-9-94
F-9-95
F-9-96
4) Free the AC harness [1] from the edge saddle [2].
5) Free the relay connector [1] of the signal cable from the connector holder
[2].
0007-7909
6) Disconnect the connector [2] from the relay connector [1].
7) Remove the fixing film unit [1].
Chapter 9
F-9-97
F-9-98
F-9-99
F-9-100
F-9-101
9-19