Installing The Reader Heater; Checking The Parts; Turning Off The Host Machine - Canon iR3570 Service Manual

20) Attach the switch settings label [1] on the top cover of the controller, and record the settings of the switches.
21) Secure the top cover [2] of the controller in place using 2 screws [3]. When doing so, check to be sure that the cable of the power supply unit is held in place
by the cable guide inside the controller and is not trapped by the top cover [2].

2.8 Installing the Reader Heater

2.8.1 Checking the Parts

iR3025 / / iR3025N / iR3030 / / iR3030N / iR3035 / / iR3035N / iR3045 / / iR3045N
Prepare the following parts because each part of the reader heater is assigned as service part.

2.8.2 Turning Off the Host Machine

iR2270 / iR2870 / iR3570 / iR4570 / / / / / / iR3025 / / iR3025N / iR3030 / / iR3030N / iR3035 / / iR3035N / iR3045 / / iR3045N
[25]
LED1 LED2 LED3
2 6
1 1
SW2
LED5
SW4
LED6
LED4
IC6
SW1
CN3 CN2
F-2-105
[2]
[3]
F-2-106
[1]
[2]
F-2-107
T-2-11
No. Name
[1] Reader Heater
[2] Clamp
[3] Screw (Binding M4X6)
BAT1
1
SW3
2
CN4
[3]
[1]
[3]
Part No. Qty.
FK2-0228-000 2 pc.
WT2-0507-000 3 pc.
XB3-6400-805 2 pc.
Chapter 2
0015-2924
0013-4841
2-27