Chapter 7
4) Remove the developing assembly [1].
Be sure to hold the developing assembly as shown.
When fitting the developing assembly, be sure to fit the lower right segment
[2] of the developing assembly [1] in the rail [3] of the machine. Thereafter,
slide the developing assembly so that [A] of the developing assembly match-
es [B] of the rail.
7-24
F-7-106
F-7-107
F-7-108
7.12.4.6 Removing the Upper Tray
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the 2 screws [1], and detach the upper tray [2].
Reference:
Lift the front of the upper tray [1], and detach it as if to slide it toward the
front.
7.12.4.7 Removing the Toner Cartridge Cover
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the 2 screws [1]; then, detach the toner bottle cover [2].
F-7-109
F-7-110
F-7-111
0007-8389
0007-8390