2) Remove the screw [1], and detach the toner feedscrew motor assembly [2].
3) Remove the screw [1], and detach the toner feedscrew motor [3] from the
base.
7.12.4.13 Removing the Sub Hopper
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the 2 screws [2] from the back of the sub hopper [1].
F-7-126
F-7-127
F-7-128
F-7-129
2) Check the phase of the gear [1] shown in the figure.
3) Remove the 3 screws [1].
4) Free the cable from the edge saddle [1].
0007-8396
5) Remove the screw [1], and release the arm [2].
6) Remove the bushing unit [2] from the sub hopper [1].
Chapter 7
F-7-130
F-7-131
F-7-132
F-7-133
7-27