Canon iR3570 Service Manual page 672

Chapter 16
ENV1/2
U1-NAMEto U4-
NAME
CST-U1/U2/
U3/U4
<ACC>
COIN
DK-P
OUT-TRAY
IN-TRAY
CC-SPSW
<INT-FACE>
IMG-CONT
AP-OPT
AP-ACCNT
16-46
Sub-item
Registering Envelope cassette ENV1/2
<Setting range>
21: ISO-C5 [Default], 22: COM10, 23: Monarch, 24: DL, 25: ISO-B5, 26:
Western style No.4
Setting whether or not to display a paper name when a paper size group (U1 to
U4) has been detected
<Setting range>
0: Display U1, U2, U3, or U4 on the touchpanel.
1: Display the paper name set in service mode (CST-U1/U2/U3/U4).
Specifying paper names for use in paper size groups
If the following special paper sizes are set to U1, U2, U3, and U4, paper of the
sizes can be handled on the universal cassette as special size paper.
<Setting range>
24: FOOLSCAP (CST-U2: Default)
25: Australian FOOLSCAP
26: OFFICIO
27: Ecuadorian OFFICIO
28: Bolivian OFFICIO
29: Argentine LETTER (U4: Default)
30: Argentine LETTER-R
31: Governmental LETTER (U1: Default)
32: Governmental LETTER-R
34: Governmental LEGAL (U3: Default)
35: FOLIO
36: Argentine OFFICIO
37: Mexican OFFICIO
38: EXECUTIVE
Sub-item
Switching the coin vendor
Set whether the coin vendor management mode can be entered or not.
<Setting range>
0: OFF [Default]
1: ON
Setting a paper size for use on a paper deck (option)
<Setting range>
0: A4 [Default]
1: B5
2: LTR
Setting whether or not to use the third paper ejection tray (mainly when the second
and third paper ejection units are mounted)
<Setting range>
0: Do not use [Default]
1: Use
Setting whether or not to use an inner paper ejection tray
<Setting range>
0: Do not use [Default]
1: Use
Setting whether or not to support the control card (CC IV /CCV) interface
<Setting range>
0: Do not support [Default]
1: Support
COPIER > OPTION > INT-FACE
Sub-item
Setting the EFI controller connection
<Setting range>
0: Usual operation [Default]
Permitting or prohibiting printing from the PrintMe application installed in the PS
print server unit
<Setting range>
0: Permit printing by a specified account
1: Permit printing, irrespective of the account [Default]
2: Prohibit printing (except by specified department ID
Setting a department ID for a print job from the PrintMe application installed in the
PS print server unit
<Setting range>
0 to 99999999 [Default: 0]
T-16-54
COPIER > OPTION > CST
Description
T-16-55
COPIER > OPTION > ACC
Description
T-16-56
Description
Level
1
2
2
Level
1
1
1
1
2
Level
1
2
2