F-5-48
5.4.3 Scanner Motor
5.4.3.1 Removing the Reader Rear Cover
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Disconnect the ADF communications cable [1] (if equipped with an ADF)
[1]
F-5-49
2) Open the copyboard cover (or the ADF).
3) Remove the 4 screws [1], and detach the reader rear cover [2].
[1]
F-5-50
5.4.3.2 Removing the Scanner Motor
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the 2 screws [1]; then, disconnect the connector [2], and detach
the 2 wire saddles [3].
[1]
[2]
F-5-51
2) Remove the spring [1], and detach the scanner motor [2].
0007-3432
F-5-52
5.4.4 Contact sensor
5.4.4.1 Removing the Reader Front Cover
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Open the copyboard cover (or ADF).
2) Remove the 2 screws [1], and detach the copyboard glass retainer (right)
[2].
F-5-53
0006-9746
3) Remove the 2 screws [1], and detach the copyboard glass retainer (left)
[2].
Chapter 5
0006-9758
5-19