Chapter 8
2) Remove the reuse band [1], and disconnect the connector [2].
3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
When tightening the 2 screws used to fix the hinge in place, be sure to close
the right door first.
8.8.12.4 Removing the Right Cover (lower front)
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Open the pedestal right door [1]. (if equipped with a Cassette Feeding
Unit-Y2)
2) Open the lower right door [2].
3) Remove the 2 screws [3], and detach the right cover (lower front) [4].
8-70
F-8-241
F-8-242
F-8-243
8.8.12.5 Removing the Pickup Assembly 1
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Slide out the cassette 1/2.
2) Disconnect the 3 connectors [1]; then, free the harness from the 2 wire
saddles [2] and the 2 clamps [3].
3) Remove the 4 screws [1], and take out the pickup unit 1 [2].
8.8.12.6 Removing the Pickup Assembly 2
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
0007-6659
1) Slide out the cassette 1/2.
2) Disconnect the connector [1], and free the harness from the guide; then,
remove the 4 screws [2], and detach the pickup assembly 2 [3].
[2]
[1]
[4]
[3]
F-8-244
F-8-245
F-8-246
0007-6661
0007-6662