Canon iR3570 Service Manual page 110

Chapter 2
12) Mount the heater PCB [1].
- 1 screw [2] (the one removed in the step 10).)
13) Fit the DC connector [2] to the PCB segment [1]; then, route it through the edge saddle [3].
14) Secure the AC harness [1] of the heater with the edge saddle [2] and the 2 wire saddles [3].
15) Fit the 2 AC connectors [2] to the PCB segment [1]; then, route it through the edge saddle [3].
16) Fit the AC connector [4] to the PCB segment [1]; then, route it through the edge saddle [5].
2-36
F-2-130
[2]
F-2-131
F-2-132
[3] [1]
F-2-133
When fitting the AC connector [4], do not get the cable [6] caught.
[1]
[1]
[3]
[2]
[1]
[2]