3) While holding the manual separation pad [1], release the right hook [2]
and then slide the right bearing [3].
4) Remove the manual pickup roller [4].
[4]
[1]
8.6.7 Manual Feed Tray Paper Sensor
8.6.7.1 Removing the Manual Tray Sensor
1) Remove the rear cover, left middle cover, and left rear cover.
2) Remove the manual tray sensor [1].
- Connector [2] 1pc.
[4]
[1]
[2]
[3]
F-8-17
[3]
[2]
F-8-18
8.6.8 Manual Pickup Solenoid
8.6.8.1 Removing the Manual Pickup Solenoid
1) Remove the rear cover, left middle cover, and left rear cover.
2) Remove the manual tray pickup solenoid [1].
- Connector [2] 1pc.
- Screw [3] 1pc.
8.6.9 Manual Separation Roller
8.6.9.1 Removing the Manual Separation Pad
1) Remove the manual pickup roller.
2) While holding the manual separation pad [1], release the claw [3] and slide
the left bearing [4] with attention paid to the sensor flag [2].
0017-3140
3) Remove the manual pickup pad [1] with the flathead screwdriver.
[2]
[1]
F-8-19
[2]
[1]
[3]
F-8-20
[4]
[2]
[3]
[1]
F-8-21
Chapter 8
0017-3143
0017-3146
8-9