2.6 Installing the Heater PCB
2.6.1 Preparing the parts
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Prepare the following parts.
2.6.2 Preparing the Host Machine
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Turn off the main power switch [1] of the host machine and disconnect the power plug [2] from the outlet.
[1]
[2]
[4]
[6]
[7]
F-2-71
[1]
Heater PCB unit
[2]
Heater switch harness
[3]
Cassette heater harness
[4]
Heater control harness
[5]
Clamp
[6]
Edge saddle (small)
[7]
Edge saddle (large)
[8]
P screw (M3x8)
One clamp is not used.
[1]
F-2-72
[3]
[5]
[8]
1 pc.
1 pc.
1 pc.
1 pc.
4 pcs.
2 pcs.
1 pc.
2 pcs.
[2]
Chapter 2
0017-5554
0017-5555
2-29