Reader Heater Unit-H1 Installation Procedure; Checking The Contents; Points To Note Before Installation - Canon imageRUNNER ADVANCE C2030 Service Manual

Reader Heater Unit-H1 Installation Procedure

Checking the Contents

[1]
[3]
[4] [5]

Points to Note Before Installation

■ Turning Main Power OFF
CAUTION
Perform the following in the order prior to the installation.
1) Turn the main power of the host machine OFF.
2) Confirm the control panel display and the main power lamp have turned OFF and
unplug the power cord.
■ Confirmation of Heater Driver PCB
Confirm that the heater driver PCB has already been installed in the host machine.
9
Installation > Reader Heater Unit-H1 Installation Procedure > Points to Note Before Installation > Confirmation of Heater Driver PCB
<For 230V model>
[2]
Confirm the following components with correct quantities are contained in
the carton.
[1]
[2]
[3]
[4]
[5]
<For 120V model>
Get the following service parts ready for installation.
[1]
[4]
[5]
9 Installation > Reader Heater Unit-H1 Installation Procedure > Points to Note Before Installation > Confirmation of Heater Driver PCB
Reader heater 2pcs. (FK2-0228)
Heater harness 1pc. (FM4-2929)
Wire saddle (large) 3pcs. (WT2-5719)
Wire saddle (small) 3pcs. (WT2-0507)
Screw 2pcs. (XB2-8400-609)
Reader heater 2pcs. (FK2-9468)
Wire saddle (small) 3pcs. (WT2-0507)
Screw 2pcs. (XB2-8400-609)
9-56
Note:
Heater harnese and Wire
saddle(large) are not used.
9-56