Removing The Front Cover - Fujitsu PRIMERGY TX300 S4 Options Manual

Floorstand model Preparation
4.1.2

Removing the front cover

Remove the front cover when making the following extensions and upgrades:
– Installation of further accessible drives
– Conversion from a floorstand model to a rack model
1
3
2
Figure 3: Removing the hard disk cover
Ê Unlock the server and remove the key.
Ê Push the drive cover up as far as possible (1).
Ê Remove the hard disk drive cover (2 + 3).
22 Options Guide
TX300 S4