14.3.2 Closing The Server - Fujitsu PRIMERGY TX300 S4 Options Manual

Floorstand model

14.3.2 Closing the server

Ê Open the latch.
1
Figure 106: Closing the server
Ê Place the left-hand side cover on the housing (1).
Ê Slide the side cover in the direction of the arrow until the latch engages
noticeably and the side cover is flush with the housing (2).
Ê Push the side cover against the housing and close the latch (3).
By doing so, the side cover is slid shut and locked in place.
Ê Insert the key.
Ê Lock the server.
Ê Connect all power plugs to the power outlets.
Ê Press the on/off key to start up the server.
118
2
Options Guide
Completion
3
TX300 S4