Installing An Accessible 5.25-Inch Drive - Fujitsu PRIMERGY TX300 S4 Options Manual

Installing an accessible 5.25-inch drive

Recommended equipping of the bays:
Order Installed accessible
drive
1. Multibay with slimline
FDD
1. Multibay with slimline
CD-RW / DVD or
slimline DVD-RW
1. Multibay with slimline
LSP or LSD
1. DVD-ROM SATA
2. LTO2 HH Ultrium
2. LTO3 HH Ultrium
2. LTO4 FH
2. Entry LTO Ultrium
2. DDS Gen 6
3. DDS Gen 6/
DDS Gen 5
4. RDX drive USB
5. SAS/SATA HDD box
6.2 Installing an accessible 5.25-inch drive
Ê Open the server and remove the front cover or the rack front cover as
described in the
"Rack model" on page
I
New 5.25-inch drives are supplied without EasyClick rails. Before
installing a new drive you must therefore remove the EasyClick rails from
the dummy cover and mount the EasyClick rails on the new drive.
40
Bay
Bay 3 bottom
Bay 3 middle
Bay 3 top
Bay 3, if
occupied bay 2
Bay 1
Bay 1, if
occupied bay 2
Bay 1+2
Bay 1
Bay 1, if
occupied bay 2
Bay 1, if
occupied bay 2
Bay 1, if
occupied bay 2
Bay 2+3, if
occupied bay
1+2
section "Floorstand model" on page 21
24.
Options Guide
Max. Bays occupied
number
1 1 x 0.5" x 5.25"
1 1 x 0.5" x 5.25
1 1 x 0.5" x 5.25
1 1 x 1.6" x 5.25
1 1 x 1.6" x 5.25
1 1 x 1.6" x 5.25
1 1 x 3.2" x 5.25
1 1 x 1.6" x 5.25
2 1 x 1.6" x 5.25
2 1 x 1.6" x 5.25
1 1 x 1.6" x 5.25
1 1 x 3.2" x 5.25
or in the
Accessible drives
Interface
FD
SATA
2
I C bus
SATA
SCSI
SCSI
SCSI
SCSI
SCSI
USB 2.0
USB 2.0
SAS
section
TX300 S4