Variant 1 - Fujitsu PRIMERGY TX300 S4 Options Manual

Accessible drives
6.4.2

Variant 1

This variant offers one bay for a LSP or LSD or slimline FDD, one bay for a
slimline CD/DVD drive and two bays for 3.5-inch hard disks.
Figure 44: Variant 1 - attaching the EasyClick rails
Ê Screw the EasyClick rails onto either side using two M3 x 4.5 mm screws (1).
Ê Install all ordered components to prepare the 3.5-inch hard disks extension
box for mounting in the chassis.
You can install:
– LSP or LSD, see the
– 5.25-inch slimline CD/DVD drive, see the
CD-/DVD drive" on page 48
– 3.5-inch slimline FDD, see the
drive" on page 51
Ê Push the hard disks extension box fully into the bay until the EasyClick rails
lock in place.
TX300 S4
Installing a hard disks extension box
section "Installing LSP or LSD" on page
section "Installing a slimline floppy disk
Options Guide
section "Installing a slimline
46.
57