Fujitsu PRIMERGY TX300 S4 Options Manual page 104

Installing the PS insertion
Figure 91: Cabling redundant PS
Ê Route the four shorter cables (T26139-Y3758-V8, T26139-Y3952-V3)
through the semicircle-shaped recess on the left.
Ê Route the longer cable (T26139-Y3952-V201) through the recess on the
bottom right.
Ê Connect all power cables to the system board and the drives (see the cabling
plans in the Appendix).
104
Conversion standard PS to hot-plug PS
Options Guide
TX300 S4