Main Memory; Equipping Rules - Fujitsu PRIMERGY TX300 S4 Options Manual

5

Main memory

V
CAUTION!
Follow the safety instructions in the
page 15 et seq..
The system board supports up to 64 Gbyte main memory. Two slots for memory
riser cards with 8 FBD slots each are available. Each memory bank can be
populated with two 512 Mbyte, 1 Gbyte, 2 Gbyte or 4 Gbyte FBD PC2-4200F or
FDB PC2-5300F fully buffered DIMM memory modules.
ECC with memory scrubbing and the Single Device Data Correction (SDDC)
function is standard.
5.1

Equipping rules

Slots for memory riser cards
Figure 14: Configuration of the main memory in memory banks and memory modules
If only one memory riser card is occupied slot DIMM A/B will be populated. The
second memory riser card is required if more than eight memory modules are
equipped.
TX300 S4
DIMM C/D (branch 1)
DIMM A/B (branch 0)
Options Guide
chapter "Safety instructions" on
31