Completion
14.4
Rack model
14.4.1 Attaching the rack front cover
Reattach the rack front cover after implementing the following expansions:
– Installation of further accessible drives
– Conversion from a floorstand model to a rack model
2
Figure 107: Attaching the rack front cover
Ê Attach the rack front cover, together with the plastic cover, from the front (1).
V
CAUTION!
The words "left" and "right" are printed on the angles of the rack front
cover to indicate which way round it must be installed.
Ê Attach the rack front cover using two screws on each side (2).
TX300 S4
Options Guide
Rack model
1
2
119