Fujitsu PRIMERGY TX300 S4 Options Manual page 47

Accessible drives
In this bay a LSP or a LSD can be installed:
Figure 30: ServerView Local Service Display (LSD) and ServerView Local Service Panel (LSP)
Figure 31: Sliding in the LSP
Ê Push the LSP/LSD into the top 3.5-inch installation bay of the 5.25-inch
multibay module, until it locks in place.
The locking latch is located at the rear left of the LSP/LSD slide-in module.
Ê Push the multibay module fully into the bay until the EasyClick rails lock in
place.
2
Ê Connect the I
plans in the Appendix).
TX300 S4
C bus connector CON.3 to the LSP/LSD (see the cabling
Options Guide
Installing a multibay module
47