Expanding/Replacing The Main Memory - Fujitsu PRIMERGY TX300 S4 Options Manual

Expanding/replacing the main memory

Main memory
1A + 1B, 2A +2B, 3A + 3B
upgrade 1, bank 3 in hotspare mode
1A + 1B, 2A +2B, 3A + 3B, 4A + 4B
upgrade 2, bank 4 in hotspare mode
5.2 Expanding/replacing the main memory
Ê Open the server as described on page 21 for the floorstand model or on
page 24 for the rack model.
Ê Remove the air duct (see the section "Removing the air duct" on page 28).
Figure 16: Removing the memory riser card
Ê Carefully pull up the memory riser card and remove it from its slot.
34 Options Guide
TX300 S4