Installing PSU modules
12.3.2 Configuration B: one PSU module and one dummy
cover
Figure 95: PSU module and dummy cover
Ê Insert the first PSU module into the PS insertion until the locking latch (see
the circle) engages.
Ê Insert the dummy cover in the second place and secure it with two screws
M3 x 6 mm.
Ê Reinstall the system fan (see on
Ê Close the server, connect it to the power outlet, and switch it on as described
on
page 118
for the floorstand model or on
108
Conversion standard PS to hot-plug PS
page
113).
page 120
Options Guide
for the rack model.
TX300 S4