Conversion From A Floorstand Model To A Rack Model - Fujitsu PRIMERGY TX300 S4 Options Manual

13 Conversion from a floorstand
model to a rack model
V
CAUTION!
Follow the safety instructions in the
page 15 et seq..
Ê Open the server and remove the front cover as described in the
"Preparation" on page 21
I
The front cover is no longer required.
Figure 96: Removing the right-hand side cover
Ê Lift the hook up slightly using a screwdriver.
Ê Push the right-hand side cover in the direction of the arrow.
Ê Lift off the right-hand side cover.
I
The right-hand side cover is no longer required.
TX300 S4
chapter "Safety instructions" on
et seq..
Options Guide
chapter
109