Replacing the processor
9.2
Replacing the processor
V
CAUTION!
Only processors of the same type may be used on the system board.
That means the number of the internal processor cores as well as the
primary clock and the FSB frequency have to be the same. For dual
operation, use a suitable multiprocessor operating system.
Ê Open the server as described on
page 24
for the rack model.
Ê Remove the air duct (see on
Ê Remove the system fan (see on
Ê Remove the heat sink holder (see on
1
Figure 69: Removing the heat sink
Ê Loosen the four screws in a crossover pattern (1-2-3-4).
Ê Loosen the heat sink by turning it back and forth and then lift it out.
80
page 21
for the floorstand model or on
page
28).
page
29).
page
74).
4
2
3
Options Guide
Processors
TX300 S4