Fujitsu PRIMERGY TX300 S4 Options Manual page 55

Accessible drives
Figure 43: Routing the slimline FDD
Ê Pull up the locking bar of the FDD connector on the system board (1).
Ê Fit the FDD cable into the connector on the system board (2).
Ensure that the blue coating on the cable points towards the locking bar (see
the cabling plans in the Appendix).
Ê Push down the locking bar (3).
Ê Attach the front cover or rack front cover, close the server, connect it to the
power outlet, and switch it on as described in the
page 113 et seq..
TX300 S4
Installing a multibay module
3
1
Options Guide
2
chapter "Completion" on
55