Configure As-Sip Settings - Polycom RealPresence Group 550 Administrator's Manual

Administrator's Guide for the Polycom RealPresence Group Series
IP communications network. AS-SIP incorporates Multilevel Precedence and Preemption, Secure Signaling
and Media, Quality of Service (QoS), and IPv6 support.

Configure AS-SIP Settings

The AS-SIP settings define service codes, network domains, and precedence levels for MLPP.
To enable AS-SIP on your system:
1 In the web interface, go to Admin Settings > Network > IP Network > SIP.
2 Select the Enable AS-SIP setting.
To configure your AS-SIP settings:
1 In the web interface, go to Admin Settings > Network > IP Network > AS-SIP.
2 Configure these settings.
Setting
Service Code
Outbound Precedence
Call Defaults
MLPP Network Domains
Define Service Codes
1 To add a Service Code, click
2 In the text field of the new line that appears, enter the numbers.
3 Click another line in the list to create the service code.
You can click to delete any of the service codes.
Define Outbound Precedence Call Defaults
1 Select the Default Domain to use for outbound calls, that is, the default network domain.
RealPresence Group systems come preconfigured for use on the uc and dsn network domains, but
others can be added. Any defined network domain can be chosen as the default domain to use for
outbound calls. uc and dsn are the preconfigured network domains and uc is the default network
domain for this setting.
2 Select the Default Precedence to use for outbound calls.
This setting accepts one of the defined precedence levels from the configured default domain. The
setting defaults to ROUTINE, which is the lowest precedence level defined in the default network
domain uc.
Define MLPP Network Domains
Although uc and dsn are preconfigured on the system, you can edit their settings or create other network
domains.
1 To edit a domain, click
Polycom, Inc.
Description
Defines one or more of the US Federal Communications Commission (FCC) N11
special services dialing codes or worldwide special dialing codes.
Defines the Default Domain (network domain) and the Default Precedence level
used when dialing a call.
Defines the MLPP network domains your network uses.
.
.
Networks
42