Positioning The Polycom Touch Control Device; Positioning The Eagleeye Acoustic Camera - Polycom RealPresence Group 550 Administrator's Manual

Administrator's Guide for the Polycom RealPresence Group Series
Polycom RealPresence Group 300, RealPresence Group 500, and RealPresence Group 550 systems
use different types of mounting brackets. For more information, refer to
contact your Polycom distributor.
2 Place the system in the desired location, keeping in mind the following pointers:
 Position the system so that the camera does not face toward a window or other source of bright
light.
 Leave enough space to connect the cables easily.
 Place the camera and display together so that people at your site face the camera when they are
looking at the display.
Figure: Positioning the Camera and Display Together

Positioning the Polycom Touch Control Device

Polycom RealPresence Group systems can be controlled by the Polycom Touch Control.
Ensure that the Touch Control is conveniently located for use during a meeting.
When the Polycom Touch Control is not paired with a RealPresence Group system, the device can be used
as a virtual remote control. To use the Polycom Touch Control as a virtual remote control, ensure that the
infrared (IR) transmitter on the front of the device is facing the RealPresence Group system you want to
control.

Positioning the EagleEye Acoustic Camera

The Polycom EagleEye
following diagram.
Figure: EagleEye Acoustic Camera Positioning
Polycom, Inc.
TM
Acoustic camera is designed to be placed on top of your monitor, as shown in the
Introducing the RealPresence Group Series
support.polycom.com or
16