Configuring The Polycom Touch Control Lan Properties - Polycom RealPresence Group 550 Administrator's Manual

Administrator's Guide for the Polycom RealPresence Group Series

Configuring the Polycom Touch Control LAN Properties

To configure Polycom Touch Control LAN settings:
1 From the Home screen, touch
2 Touch the LAN Properties tab.
3 Configure the following IP Address (IPv4) settings.
Setting
Set IP Address
IP Address
Subnet Mask
Default Gateway
4 Configure the following DNS settings.
Setting
Domain Name
DNS Servers
5 Optionally, view the general settings.
Setting
Duplex Mode
LAN Speed
Polycom, Inc.
Administration.
Description
Specifies how the Touch Control obtains an IP address.
• Obtain IP address automatically — Select if the Touch Control gets an IP address
from the DHCP server on the LAN.
• Enter IP address manually — Select if the IP address is not automatically assigned.
Displays the IP address currently assigned to the Touch Control, if the Touch Control
obtains its IP address automatically.
If you selected Enter IP address manually, enter the IP address here.
Displays the subnet mask currently assigned to the Touch Control.
If you selected Enter IP address manually, enter the subnet mask here.
Displays the gateway currently assigned to the Touch Control.
If you selected Enter IP address manually, enter the gateway IP address here.
Description
Displays the domain name currently assigned to the Touch Control.
If the Touch Control does not automatically obtain a domain name, enter one here.
Displays the DNS servers currently assigned to the Touch Control.
If the Touch Control does not automatically obtain a DNS server address, enter up to two
DNS servers here.
You can specify IPv4 DNS server addresses only when the IPv4 address is entered
manually. When the IPv4 address is obtained automatically, the DNS Server addresses
are also obtained automatically.
Description
Displays the duplex mode.
Displays the LAN speed.
Networks
36