Settings For Non-Polycom Microphones - Polycom RealPresence Group 550 Administrator's Manual

Administrator's Guide for the Polycom RealPresence Group Series
To make a test call in stereo using the remote control:
» Enter stereo.polycom.com in the dialing field and press

Settings for Non-Polycom Microphones

You can configure a Polycom RealPresence Group system to use with non-Polycom microphones
To configure a Polycom RealPresence Group system to use devices connected directly to
audio input 1:
1 In the web interface, go to Admin Settings > Audio/Video > Audio > Audio Input.
2 Do the following:
a Enable Use Input for Microphone (if available).
b Enable Echo Canceller.
c Adjust the Audio Input Level if necessary.
d Speak into the microphones that are connected to the audio line inputs. The audio meter should
peak at about 5 dB for normal speech.
Polycom, Inc.
Microphones and Speakers
on the remote control.
79