Configuring Lan Properties; Configuring Realpresence Group System Lan Properties; Configure Ip Address (Ipv4) Settings - Polycom RealPresence Group 550 Administrator's Manual

Realpresence group series video conferencing system
Hide thumbs Also See for RealPresence Group 550:
Table of Contents

Advertisement

Administrator's Guide for the Polycom RealPresence Group Series
The LAN connector on the RealPresence Group 550 systems has two lights to indicate connection status
and traffic.
Indicator Light
Left light off, right light
off
Right light off, left light
green
Right light blinking
yellow, left light green

Configuring LAN Properties

You can configure LAN properties for the RealPresence Group systems and for Polycom Touch Control
Devices. Refer to the following section and
page 36.

Configuring RealPresence Group System LAN Properties

To configure RealPresence Group System LAN properties:
» Do one of the following:
 In the local interface, go to Settings > Administration > LAN Properties.
 In the web interface, go to Admin Settings > Network > LAN Properties.

Configure IP Address (IPv4) Settings

Configure the following IP Address (IPv4) settings on the LAN Properties screen.
Setting
IP Address
Your IP Address is
Subnet Mask
Default Gateway
Polycom, Inc.
Connection Status
No 10/100/1000 Base-T connection.
10/100/1000 Base-T connection without activity.
10/100/1000 Base-T connection and blinks with network
traffic.
Configuring the Polycom Touch Control LAN Properties
Description
Specifies how the system obtains an IP address.
Obtain IP address automatically — Select if the system gets an IP address from
SLAAC (IPv6 only) or a DHCP server on the LAN.
Enter IP address manually — Select if the IP address will not be assigned
automatically.
If the system obtains its IP address automatically, this area displays the IP address
currently assigned to the system.
If you selected Enter IP address manually, enter the IP address here.
Displays the subnet mask currently assigned to the system.
If the system does not automatically obtain a subnet mask, enter one here.
Displays the gateway currently assigned to the system.
If the system does not automatically obtain a gateway IP address, enter one here.
Networks
on
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents