Polycom Microphone Lights - Polycom RealPresence Group 550 Administrator's Manual

Administrator's Guide for the Polycom RealPresence Group Series
Number of
Microphones with
Stereo Enabled
Three
Not Used
Left Channel
Right
Left and right channel assignments depend on the settings that you select on the Stereo Settings screen. If
Autorotation is enabled for a microphone, the system automatically assigns active channels for the
microphone. Make sure that microphones with Autorotation disabled are oriented as shown in the following
illustration.
Figure: Microphone Placement
After you place the microphones, you will need to configure the system to send stereo as described in
Settings on page 77.

Polycom Microphone Lights

The following table describes the behavior of the microphone lights on a Polycom table microphone.
Microphone Light
Off
Green
Red
Blinking Red
Amber
Polycom, Inc.
Long Table
Mic 1 set to
Left+Right
Mic 2 set to
Left+Right
Mic 3 set to
Left+Right
Status
Not in a call
In a call, mute off
Mute on
Configuration error occurred, such as exceeding the number of supported conference link
devices
Firmware upload
Microphones and Speakers
Wide Table
Mic 1 set to
Left
Mic 2 set to
Left+Right
Mic 3 set to
Right
Stereo
71