Remote Access - Polycom RealPresence Group 550 Administrator's Manual

Administrator's Guide for the Polycom RealPresence Group Series
2 Configure the following settings. The order in which the settings are displayed differs between the
interfaces.
Setting
Admin ID
Admin Room Password
Use Room Password for

Remote Access

Admin Remote Access
Password
Require User Login for System
Access
User ID
User Room Password
User Remote Access Password
When you configure the RealPresence Group system to use the Maximum security profile, the
system will force you to change the Admin ID and User ID from their default values.
Remote Access
Remote access means using a Polycom RealPresence Group system in some way other than through the
local interface, such as by using the web, a serial port, or telnet. A session is an instance of a user connected
Polycom, Inc.
Description
Specifies the ID for the administrator account. The default Admin ID is
admin.
Admin IDs are not case sensitive.
Specifies the password for the local administrator account used when logging
in to the system locally.
When this password is set, you must enter it to configure the system Admin
Settings using the remote control. The password cannot contain spaces or
be more than 40 characters. Passwords are case sensitive.
The default Admin Room Password is the 14-digit system serial number from
the System Information screen or the back of the system.
Specifies whether the room password used for local login is also used for the
remote login. When this setting is disabled, the remote access password
settings are displayed.
Specifies the password for the local administrator account used when logging
in to the system remotely using the web interface or a telnet session.
When this password is set, you must enter it to update the software or
manage the system from a computer. The password cannot contain spaces
or more than 40 characters.
Specifies whether the system automatically prompts users to log in when the
system comes out of sleep mode or completes the startup process. Enabling
this setting requires a login to use the local interface.
You can enable this setting at any time.
Specifies the ID for the user account. The default User ID is user.
User IDs are not case sensitive.
Specifies the password for the local user account used when logging in to the
system locally.
The password cannot contain spaces or more than 40 characters.
Passwords are case sensitive.
Specifies the password for the local user account used when logging in to the
system remotely.
The password cannot contain spaces or more than 40 characters.
Passwords are case sensitive.
Security
106