Using The Web Interface Place A Call Page; Search; Place A Call - Polycom RealPresence Group 550 Administrator's Manual

Administrator's Guide for the Polycom RealPresence Group Series
setting up Microsoft Exchange Server 2010 or 2013 accounts to use the calendaring service, refer to the
Polycom Unified Communications Deployment Guide for Microsoft Environments available on the Polycom
website.

Using the Web Interface Place a Call Page

When you click the Place a Call link on the web interface, the default view shows you the following widgets:
● Search
● Place a Call
● Contacts
● Manual Dial
● Speed Dial
● Recent Calls
● Support Documents
For information on configuring Home screen settings for the local interface, refer to
Interface Home Screen

Search

In a text box just under the IP Address bar on the web interface Place a Call page, you can enter a search
term to receive a list of RealPresence Group system web pages. For instance, if you type Call, the system
generates a list of pages that match your search term, such as Call Settings, Recent Calls, and Time in
Call. Select any of the choices to go directly to that page of the web interface.

Place a Call

In the Place a Call area, you can place a call by searching your contacts or manually:
To call a favorite contact:
1 In the Contacts section, enter a name and click Search.
2 Select a contact name and click Call.
For information about editing Favorites contacts, refer to
To place a call manually:
1 Click Manual Dial.
2 Enter the number.
3 Click Call.
The call is placed according to the default settings you selected in Admin Settings > Network > Dialing
Preferences. You can select settings other than the defaults in the two lists below the text entry field.
To require a password, select Meeting Password and enter a password in the field that displays below the
check box.
Polycom, Inc.
on page 27.
Managing Favorites on page 94.
Placing and Answering Calls
Customizing the Local
98