Base Profiles; Configuring The Adp Profile Summary Screen - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 32 ADP

32.3.1 Base Profiles

The ZyWALL comes with base profiles. You use base profiles to create new
profiles.
Figure 393 Base Profiles
These are the default base profiles at the time of writing.
Table 164 Base Profiles
BASE
PROFILE
all
none
OK
Cancel

32.3.2 Configuring The ADP Profile Summary Screen

Select Anti-X > ADP > Profile.
Figure 394 Anti-X > ADP > Profile
550
DESCRIPTION
All traffic anomaly and protocol anomaly rules are enabled. Rules with a
high or severe severity level (greater than three) generate log alerts
and cause packets that trigger them to be dropped. Rules with a very
low, low or medium severity level (less than or equal to three) generate
logs (not log alerts) and no action is taken on packets that trigger
them.
All traffic anomaly and protocol anomaly rules are disabled. No logs are
generated nor actions are taken.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
ZyWALL USG 300 User's Guide