ZyXEL Communications ZyWALL USG 300 User Manual page 760

Chapter 46 System
46.7.5.1 Example 1: Microsoft Windows
This section describes how to access the ZyWALL using the Secure Shell Client
program.
Launch the SSH client and specify the connection information (IP address, port
1
number) for the ZyWALL.
Configure the SSH client to accept connection using SSH version 1.
2
A window displays prompting you to store the host key in you computer. Click Yes
3
to continue.
Figure 520 SSH Example 1: Store Host Key
Enter the password to log in to the ZyWALL. The CLI screen displays next.
46.7.5.2 Example 2: Linux
This section describes how to access the ZyWALL using the OpenSSH client
program that comes with most Linux distributions.
Test whether the SSH service is available on the ZyWALL.
1
Enter "telnet 192.168.1.1 22" at a terminal prompt and press [ENTER]. The
computer attempts to connect to port 22 on the ZyWALL (using the default IP
address of 192.168.1.1).
A message displays indicating the SSH protocol version supported by the
ZyWALL.
Figure 521 SSH Example 2: Test
$ telnet 192.168.1.1 22
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
SSH-1.5-1.0.0
760
ZyWALL USG 300 User's Guide