Ppp Interface Edit - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 10 Interfaces
Table 48 Network > Interface > PPP (continued)
LABEL
Add icon
Apply
Reset

10.6.2 PPP Interface Edit

Note: You have to set up an ISP account before you create a PPPoE/PPTP interface.
196
DESCRIPTION
This column lets you create, edit, remove, activate, deactivate,
connect and disconnect interfaces.
To create an interface, click the Add icon at the top of the column.
The PPPoE/PPTP Interface Add/Edit screen appears.
To edit an interface, click the Edit icon next to it. The PPPoE/PPTP
Interface Edit screen appears.
To remove an interface, click the Remove icon next to it. The ZyWALL
confirms you want to remove it before doing so.
To activate or deactivate an interface, click the Active icon next to it.
Make sure you click Apply to save and apply the change.
To connect or disconnect an interface, click the Connect icon next to
it. You might use this icon to test the interface or to manually
establish the connection for a Dial-on-Demand PPPoE/PPTP
interface.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL USG 300 User's Guide