ZyXEL Communications ZyWALL USG 300 User Manual page 340

Chapter 20 Firewall
The screen for configuring an address object opens. Configure it as follows and
3
click OK.
Figure 225 Firewall Example: Create an Address Object
Select Create Object in the Service drop-down list box.
4
The screen for configuring a service object opens. Configure it as follows and click
5
OK.
Figure 226 Firewall Example: Create a Service Object
Select From WAN and To LAN.
6
Enter the name of the firewall rule.
7
Make sure Dest_1 is selected for the Destination and MyService is selected as
8
the Service. Enter a description and configure the rest of the screen as follows.
Click OK when you are done.
Figure 227 Firewall Example: Edit a Firewall Rule
340
ZyWALL USG 300 User's Guide