Terminology In The Zywall - ZyXEL Communications ZyWALL USG 300 User Manual

• The WAN zone contains the ge2 and ge3 interfaces (physical ports 2 and 3).
They use public IP addresses to connect to the Internet.
• The DMZ zone contains the ge4 and ge5 interfaces (physical ports 4 and 5).
The DMZ zone has servers that are available to the public. These interface uses
private IP addresses 192.168.2.1 and 192.168.3.1.
• The WLAN zone contains the ge6 interface (physical port P6). This is a second
protected zone for connecting wireless access points. The ge6 interface uses
private IP address 10.59.0.1 and the connected devices use IP addresses in the
10.59.0.2 to 10.59.0.254 range.
• Interface ge7 (physical port 7) is not part of a zone by default. Add it to a zone
to apply security policies.

5.3 Terminology in the ZyWALL

This section highlights some differences in terminology or organization between
the ZyWALL and other routers, particularly ZyNOS routers.
Table 21 ZyWALL Terminology That is Different Than ZyNOS
ZYNOS FEATURE / TERM
Port forwarding
IP alias
Gateway policy
Network policy (IPSec SA)
Hub-and-spoke VPN
Table 22 ZyWALL Terminology That Might Be Different Than Other Products
FEATURE / TERM
Destination NAT (DNAT)
Source NAT (SNAT)
Table 23 NAT: Differences Between the ZyWALL and ZyNOS
ZYNOS FEATURE / SCREEN
Port forwarding
Trigger port, port triggering
Address mapping
Address mapping (VPN)
Table 24 Bandwidth Management: Differences Between the ZyWALL and ZyNOS
ZYNOS FEATURE / SCREEN
Interface bandwidth management
(outbound)
OSI level-7 bandwidth management
General bandwidth management
ZyWALL USG 300 User's Guide
Chapter 5 Configuration Basics
ZYWALL FEATURE / TERM
Virtual server
Virtual interface
VPN gateway
VPN connection
(VPN) concentrator
ZYWALL FEATURE / TERM
Virtual server
Policy route
ZYWALL FEATURE / SCREEN
Virtual server
Policy route
Policy route
IPSec VPN
ZYWALL FEATURE / SCREEN
Interface
Application patrol
Policy route
85