Adp Technical Reference - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 32 ADP
The following table describes the fields in this screen.
Table 167 ADP > Profile > Protocol Anomaly
LABEL
Name
HTTP Inspection/TCP Decoder/UDP Decoder/ICMP Decoder
Name
Activation
Log
Action
OK
Cancel
Save

32.4 ADP Technical Reference

This section is divided into traffic anomaly background information and protocol
anomaly background information.
556
DESCRIPTION
This is the name of the profile. You may use 1-31 alphanumeric
characters, underscores(
be a number. This value is case-sensitive. These are valid, unique profile
names:
MyProfile
mYProfile
Mymy12_3-4
These are invalid profile names:
1mYProfile
My Profile
MyProfile?
Whatalongprofilename123456789012
This is the name of the protocol anomaly rule. Click the Name column
heading to sort in ascending or descending order according to the
protocol anomaly rule name.
Click the icon to enable or disable a rule or group of rules.
Select whether to have the ZyWALL generate a log (log), log and alert
(log alert) or neither (no) when traffic matches this anomaly rule. See
Chapter 48 on page 787
Select what the ZyWALL should do when a packet matches a rule.
none: The ZyWALL takes no action when a packet matches the
signature(s).
block: The ZyWALL silently drops packets that matches the rule. Neither
sender nor receiver are notified.
Click OK to save your settings to the ZyWALL, complete the profile and
return to the profile summary page.
Click Cancel to return to the profile summary page without saving any
changes.
Click Save to save the configuration to the ZyWALL but remain in the
same page. You may then go to the another profile screen (tab) in order
to complete the profile. Click OK in the final profile screen to complete the
profile.
), or dashes (-), but the first character cannot
_
for more on logs.
ZyWALL USG 300 User's Guide