ZyXEL Communications ZyWALL USG 300 User Manual page 71

Figure 28 VPN Express Wizard: Step 4
The following table describes the labels in this screen.
Table 15 VPN Express Wizard: Step 4
LABEL
Summary
Rule
Name
Secure
Gateway
Pre-
Shared
Key
Local
Policy
Remote
Policy
Configuration
for Secure
Gateway
ZyWALL USG 300 User's Guide
DESCRIPTION
This is the name of the VPN connection (and VPN gateway).
This is the WAN IP address or domain name of the remote IPSec router. If
this field displays Any, only the remote IPSec router can initiate the VPN
connection.
This is a pre-shared key identifying a communicating party during a phase
1 IKE negotiation.
This is a (static) IP address and Subnet Mask on the LAN behind your
ZyWALL.
This is a (static) IP address and Subnet Mask on the network behind the
remote IPSec router. If this field displays Any, only the remote IPSec
router can initiate the VPN connection.
These commands set the matching VPN connection settings for the
remote gateway. If the remote gateway is a ZLD-based ZyWALL, you can
copy and paste this list into its command line interface in order to
configure it for the VPN tunnel.
You can also use a text editor to save these commands as a shell script
file with a ".zysh" filename extension. Then you can use the file manager
to run the script in order to configure the VPN connection.
See the commands reference guide for details on the commands displayed
in this list.
Chapter 4 Wizard Setup
71